HowMuchStuff

Construction Material Prices

By Taro Schenker | Updated November 15, 2026

Quick Answer: The Bureau of Labor Statistics tracks wholesale construction material prices monthly through the Producer Price Index (PPI). As of October 2026, the overall construction materials index is up 12.1% from a year earlier. Rebar & Bar Joists (+34.1%) and Copper & Brass Mill Shapes (+23.9%) rose the most, and Gypsum Products had the lowest change (+0.9%).

Material Prices as of October 2026

MaterialPPI IndexYoY ChangeTrendAffects
Rebar & Bar Joists427.6+34.1%↑Foundations, concrete reinforcement
Copper & Brass Mill Shapes829.7+23.9%↑Plumbing, electrical
Plywood312.4+16.9%↑Sheathing, siding, subfloors
Construction Materials381.6+12.1%↑All construction projects
Lumber275.6+6.4%↑Decks, fences, framing, additions
Insulation Materials296.5+4.6%↑Insulation projects
Prepared Paint449.1+3.8%↑Interior and exterior painting
Ready-Mix Concrete394.8+2.4%↑Patios, driveways, foundations
Asphalt Roofing & Siding365.9+2.3%↑Roofing, driveways
Gypsum Products486.6+0.9%→Drywall installation

Source: BLS Producer Price Index via FRED. Base comparison: the same month a year earlier.

How to Read This Data

  • PPI Index: The raw index value. Higher numbers mean higher prices relative to the base year (1982 = 100 for most series).
  • YoY Change: Percentage change from a year earlier. Positive means prices are rising; negative means falling. This is the most useful number for project planning.
  • Trend: ↑ = rising (over 1%), ↓ = falling (over 1%), → = stable (within 1%).
  • Impact on your project: A PPI change affects the material part of your project cost. Labor costs are not part of the PPI.

The data comes from the Federal Reserve Economic Data (FRED). Series IDs: WPUSI012011, WPU081, WPU1333, WPU1361, WPU137, WPU1074051, WPU1392, WPU083, WPU0621, WPU102502.

What This Means for Your Project

Plumbing costs elevated: The copper and brass index is up 23.9% from a year earlier. Budget extra for plumbing-heavy projects like bathroom remodels and kitchen renovations. Consider PEX piping as an alternative where code allows.

Our cost calculators use fixed material prices and do not adjust them by these indexes, so compare their material lines with current supplier prices.

Related Cost Calculators

Estimates are for planning purposes only. Consult a qualified contractor for critical projects. Actual material requirements may vary based on site conditions, waste, and installation methods.

Material prices are national averages set in February 2026 (the most-used re-checked against retail and supplier listings in November 2026). Labor rates come from BLS OEWS May 2024 wage data. Prices vary by region, season, and supplier.

Frequently Asked Questions

What is the Producer Price Index (PPI)?▾
The Producer Price Index (PPI) measures the average change over time in the selling prices received by domestic producers for their output. For construction materials, it tracks wholesale prices — what manufacturers and distributors charge, not what consumers pay at retail. The Bureau of Labor Statistics (BLS) publishes PPI data monthly. Our tracker uses PPI data from the Federal Reserve Economic Data (FRED).
Are construction material prices going up in 2026?▾
In the latest data we have loaded (as of October 2026), the overall construction materials index is up 12.1% from a year earlier. Individual materials range from Gypsum Products at +0.9% to Rebar & Bar Joists at +34.1%. Check the table above for each material.
How does PPI affect my project cost?▾
When a material's PPI rises, contractors and suppliers pay more for it wholesale, and that cost usually reaches homeowners in quotes. Only the material part of a project is affected, not labor, and retail prices can move by a different amount than the wholesale index. Our cost calculators use fixed material prices and do not adjust them by PPI. Some of them show the latest index change for a related material next to the estimate when you enter a ZIP code.
What is the base period for PPI comparison?▾
Our tracker compares the latest month's index with the same month a year earlier, which removes most seasonal swings. Most of the series use 1982 as the base year (1982 = 100), so an index of 300 means prices are 3 times their 1982 level.
How often is this data updated?▾
The BLS publishes PPI data monthly, typically in the second or third week of the following month. We refresh this tracker from FRED, and the 'as of' date shows the most recent month loaded. For time-sensitive projects, check the BLS website for newer releases and revisions.
Which construction material has increased the most?▾
As of October 2026, Rebar & Bar Joists has the largest increase among the materials we track, at +34.1% from a year earlier. Material prices are cyclical and can change from month to month with demand, supply chain conditions, and global commodity markets.